Gain Estimated 3.18 Horsepower in 2008, 2009, 2011, 2012 & 2013 Yamaha Rhino with K&N Air Intake
- 15 apr 2009
K&N has a new performance air intake kit, part number 63-1121, for 2008, 2009, 2011, 2012 & 2013 Yamaha YXR700 Rhino FI 700 Side by Side owners. See the complete list of models below. Take a look at our 63-1121 features video to see dyno testing in progress.
K&N's 63-1121 air intake system for 2008, 2009, 2011, 2012 & 2013 Yamaha YXR700 Rhino FI 700.
2008 Yamaha Rhino 700cc
K&N dynamometer testing shows more than an 11% increase in peak power gain. An estimated 3.18 horsepower gain was measured at 35.6 mph. K&N’s air intake design has lower restriction than the factory system. The result is a power gain you can feel immediately along with excellent air filtration.
63-1121 K&N air intake system installed in a 2008 Yamaha Rhino FI 700.
Dyno chart for 2008, 2009, 2011, 2012 & 2013 Yamaha Rhino FI 700.
The 63-1121 air intake system replaces the stock airbox and intake track with an intake tube, an oversized airbox and a chrome top K&N air filter (RC-2960XD). The K&N air filter is washable and reusable. It is also pre-oiled and ready for installation.
A heat shield assembly is installed into the vehicle and secured with the provided hardware to the factory airbox mounting locations. The powder coated black heat shield isolates the K&N air filter from the engine compartment and allows it to receive a consistent flow of fresh air. Installation can be performed in 90 minutes or less. Take a look at our 63-1121 installation video to see all the steps involved.
A K&N DryCharger is also supplied for increased protection and longer service intervals in extreme dust or wet conditions. Fuel management modifications are not necessary to receive increased performance.
Models for air intake part number 63-1121 are:
2013 Yamaha YXR700 Rhino FI 700
2012 Yamaha YXR700 Rhino FI 700
2011 Yamaha YXR700 Rhino FI 700
2009 Yamaha YXR700 Rhino FI 700
2008 Yamaha YXR700 Rhino FI 700
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
K&N's 63-1121 air intake system for 2008, 2009, 2011, 2012 & 2013 Yamaha YXR700 Rhino FI 700.
2008 Yamaha Rhino 700cc
63-1121 K&N air intake system installed in a 2008 Yamaha Rhino FI 700.
Dyno chart for 2008, 2009, 2011, 2012 & 2013 Yamaha Rhino FI 700.
The 63-1121 air intake system replaces the stock airbox and intake track with an intake tube, an oversized airbox and a chrome top K&N air filter (RC-2960XD). The K&N air filter is washable and reusable. It is also pre-oiled and ready for installation.
A heat shield assembly is installed into the vehicle and secured with the provided hardware to the factory airbox mounting locations. The powder coated black heat shield isolates the K&N air filter from the engine compartment and allows it to receive a consistent flow of fresh air. Installation can be performed in 90 minutes or less. Take a look at our 63-1121 installation video to see all the steps involved.
A K&N DryCharger is also supplied for increased protection and longer service intervals in extreme dust or wet conditions. Fuel management modifications are not necessary to receive increased performance.
Models for air intake part number 63-1121 are:
2013 Yamaha YXR700 Rhino FI 700
2012 Yamaha YXR700 Rhino FI 700
2011 Yamaha YXR700 Rhino FI 700
2009 Yamaha YXR700 Rhino FI 700
2008 Yamaha YXR700 Rhino FI 700
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
