K&N Air Intake Upgrades 2014-2016 Chevy Silverado / GMC Sierra 1500 EcoTec3 4.3L V6 Horsepower

K&N Air Intake for 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6

K&N Performance Air Intake System 77-3085KP for 2014-2016 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6

These days a full-size pickup truck is expected to do more than just carry a fully loaded bed, or tow a trailer. A modern full-size pickup truck is expected to also incorporate a refined interior with modern-day technology, a comfortable platform that is quiet on-road, rugged off-road, and of course, it must have style. Not only that, but EPA requirements and consumer expectations have forced full-size truck manufacturers to squeeze more power and better fuel economy out of their engines.

General Motors (GM) used the 4.3L 4300 Vortec V6 as its base engine for the full-size Chevrolet Silverado 1500 and GMC Sierra 1500 for years. In 2013 this engine was rated at 195 horsepower and 260 lb-ft of torque. However, for 2014 the same size 4.3L EcoTec3 V6 engine with new technologies such as direct injection, variable valve timing, and even active fuel management, allows the standard V6 to produce 285 horsepower and 305 lb-ft of torque. This puts the standard 2014 Silverado / Sierra EcoTec3 V6’s performance on par with the 4.8L Vortec V8 engine of the 2013 Silverado and Sierra.

This of course doesn’t mean that 2014 Chevy Silverado 1500 and GMC Sierra 1500 owners won’t benefit from a little more horsepower and torque. In fact, by simply installing K&N performance air intake 77-3085KP 2014 Silverado and Sierra V6 owners can increase acceleration and add more power for hauling or towing.

2014 Chevy Silverado 1500 features a 4.3L EcoTec3 V6 engine

This 2014 Chevy Silverado 1500 features a 4.3L EcoTec3 V6 engine as its standard power plant and boast best in class standard V6 torque

77-3085KP intake system looks good under the hood of the 2014 Chevy Silverado 4.3L V6

The 77-3085KP intake system’s bright intake tube looks good under the hood of this 2014 Chevrolet Silverado 4.3L EcoTec3 V6

The K&N 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory system with a free-flowing, mandrel-bent aluminum air intake tube to help minimize restriction, straighten, and increase airflow to the engine. The intake tube is then finished with a bright, chrome-like, finish for good looks and durability.

A K&N high-flow chrome top conical air filter RF-1041 is fitted to the inlet of the intake system to provide superior airflow and superior performance without sacrificing filtration efficiency. The filter is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions.

When it does come time to service the K&N air filter, cleaning can be easily completed using one of K&N’s readily available Recharger air filter service kits. The 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system also incorporates an air filter heat shield which helps to guard cooler air entering the engine from ambient heat.

Because the 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system is designed to decrease restriction, and increase airflow, it is able to make impressive performance gains in horsepower and torque throughout the entire RPM range of the already powerful standard V6 engine.

On the dyno, when installed on a 2014 Chevrolet Silverado 4.3 liter EcoTec3 V6, the 77-3085KP performance air intake system produced an estimated additional 10 horsepower at 5285 RPM and 13.54 pound-feet of torque at just 3,548 RPM. Increased power will require the engine to expend less energy to cruise down the highway with active fuel management in place, or help during full throttle acceleration situations.

2014 Chevrolet Silverado 4.3 liter EcoTec3 V6 gains an estimated 10 more horsepower

2014 Chevrolet Silverado 4.3 liter EcoTec3 V6 gains an estimated 10 more horsepower and 13.54 lb-ft of torque

The 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions.

The cold air intake maintains all necessary factory connections and does not require any additional modifications be made to the vehicle. K&N backs its air filters and air intake systems with a 10-year, Million Mile Limited Warranty® so that owners can rest assured that their intake system can stand up to tough conditions.

Whether the 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 is used as a reliable daily driver, dedicated workhorse, or something in between, the K&N 77-3085KP Performance Air Intake system will provide increased performance with better engine sound for years to come.

The 77-3085KP performance air intake system is guaranteed to increase horsepower and torque on the following Chevrolet and GMC models:

2016 GMC SIERRA 1500 4.3L V6
2016 CHEVROLET SILVERADO 1500 4.3L V6
2015 GMC SIERRA 1500 4.3L V6
2015 CHEVROLET SILVERADO 1500 4.3L V6
2014 GMC SIERRA 1500 4.3L V6
2014 CHEVROLET SILVERADO 1500 4.3L V6

Find additional air intakes for your Chevrolet Silverado / GMC Sierra, or another vehicle, using the search by vehicle tool on KNFilters.com or view the GMC Sierra 1500 Air Intakes or Chevy Silverado 1500 Air Intakes pages. To find a dealer near you, please use the K&N Dealer Search function.

clear
 
K&N PRODUCT SEARCH K&N Filters Logo WHERE TO BUY K&N