Quick and Easy Upgrades for the Ford F-150

The Ford F-150 is the best selling truck in America and K&N performance products make it even be

The Ford F-150 is the best selling truck in America and K&N performance products make it even better

The Ford F-150 has been the best-selling vehicle in America for over 30 years. It is the perfect combination of performance, style, class, and comfort packaged in a multi-use vehicle. What is there not to love? To make one of the most popular vehicles even better, K&N has designed and engineered performance products for the Ford F-150. From replacement air filters to full intake systems and even washable and reusable cabin air filters, K&N performance products are designed to enhance the already highly regarded F-150. This guide will cover the most recent years of the F-150, including the 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, and 2017. However, we make filters for F-150s going back to 1975. Just use the K&N application search to find the right filter for your car or truck.

K&N REPLACEMENT AIR FILTERS

The K&N 33-2385 replacement air filter fits every F-150 with all engine sizes from 2009-2017

The K&N 33-2385 replacement air filter fits every F-150 with all engine sizes from 2009-2017

K&N manufactures washable and reusable replacement air filters for the Ford F-150 going all the way back to 1975. These K&N air filters are designed to increase horsepower and torque for the lifetime of your pickup. K&N is so sure of this that they guarantee these filters with their 10-Year/Million Mile Limited Warranty. The K&N replacement air filters are made of several layers of premium woven cotton media that provides up to a 50% increase in airflow to the engine while providing excellent filtration. Our filters come pre-oiled so they are ready to install right out of the box.

The 2009-2017 F-150 has used the same base air box and in turn, they all use the same K&N replacement air filter. The high performance 33-2385 fits all Ford F-150 trucks from 2009-2017 no matter the engine it has. All the engines, including the 3.5L Ecoboost, 3.5L, 3.7L, 4.6L, 5.0L, 5.4L, and 6.2L. The K&N replacement air filter is a very easy modification you can do in your driveway in a matter of minutes. It is designed to boost horsepower, torque, and rate of acceleration.

K&N PERFORMANCE AIR INTAKES

The K&N 57-2575 cold air intake adds an estimated 12 HP to 2009 and 2010 F-150 5.4L engines

The K&N 57-2575 cold air intake adds an estimated 12 HP to 2009 and 2010 F-150 5.4L engines

The next level of performance from K&N is their line of cold air intakes. These are designed to flow more air than the factory air intake system. The extra air that the K&N cold air intake flows, increases the power made by the engine. Every K&N intake comes with a dyno sheet to show what we saw when we installed the kit on a test vehicle. The K&N cold air intakes also provide excellent filtration and come with the famous 10-Year/Million Mile Warranty. K&N air intakes are very easy to install, and install can be accomplished in around 90 minutes with simple hand tools.

For 2009-2010 4.6L F-150 owners, the K&N 57-2580 adds an estimated 16 HP and 18 lb-ft of torque

For 2009-2010 4.6L F-150 owners, the K&N 57-2580 adds an estimated 16 HP and 18 lb-ft of torque

K&N's 57-2575 is designed to fit 2009 and 2010 Ford F150 trucks equipped with the 5.4L engine. When dyno tested, this intake added an estimated 12 horsepower at 4600 RPM and 14 lb-ft of torque at 4600 RPM on a 2010 F150 5.4L. The air intake system consists of a black plastic air intake tube and high flow conical air filter. The 57-2575 is guaranteed to increase horsepower and is easy to install in 90 minutes.

If your 2009 or 2010 F-150 came with the 4.6L, K&N makes the 57-2580 cold air intake for your truck. The kit added an estimated 16 horsepower at 4650 RPM and 18 lb-ft of torque.

If you own a 2009-2010 4.6L F-150 and prefer the polished look, the K&N 77-2580KP intake is for

If you own a 2009-2010 4.6L F-150 and prefer the polished look, the K&N 77-2580KP intake is for you

If you like the polished look, K&N offers the 77-2580KP for the 2009 and 2010 Ford F-150 with the 4.6L engine. The kit includes a polished aluminum air tube, polished capped conical air filter, and black aluminum heat shield. At an estimated gain of 15 horsepower and 17 lb-ft of torque, this K&N intake system is no slouch and will help breathe some new life into your 4.6L-powered F-150.

For 2011, 2012, 2013, and 2014 Ford F-150s that came equipped with the 5.0L Coyote motor, the K&N 57-2581 was designed for your truck. It is 50 state legal and added an estimated 12 horsepower at 5304 RPM and 12 lb-ft of torque at 4305 RPM. If you are looking for a stealthier looking, blacked out kit, the K&N 71-2581 Blackhawk Induction cold air intake system was developed for the 2011-2014 Ford F-150 5.0L Coyote. The kit comes with a black, dry synthetic filter so no more oiling, and a black powdercoated aluminum intake tube. It made an estimated 7 horsepower and 2 lb-ft of torque on K&N’s dyno.

If black isn’t your thing and you would rather have a polished intake on your 2011-2014 5.0L F-150, the K&N 77-2581KP is for you. It has a polished air tube and polished filter end cap. It won’t void any factory warranties and is guaranteed to add power. K&N saw an estimated 10 horsepower and 10 lb-ft of torque on our dyno with the 77-2581KP installed on a 2011 Ford F-150.

Whether you have the 3.5L, 3.7L, 4.6L, 5.0L, 5.4L, or 6.2L K&N makes a product for your truck

Whether you have the 3.5L, 3.7L, 4.6L, 5.0L, 5.4L, or 6.2L K&N makes a product for your truck

For 2011, 2012, 2013, and 2014 3.5L Ecoboost F-150s, a quick and easy upgrade that is guaranteed to add horsepower is the 57-2583 K&N cold air intake. It adds an estimated 11 horsepower at 4318 RPM and 17 lb-ft of torque at 3450 RPM. The kit is designed to feed air to both turbos and helps them breathe better than the stock intake.

If your 2011 or 2012 F-150 came with the big 6.2L V8 engine, K&N makes the 57-2584 for it. The kit is an easy upgrade and adds an estimated 27 horsepower at 5347 RPM and almost 17 lb-ft of torque at 3578 RPM. It is legal in all 50 states and comes with K&N’s 10-Year/Million Mile Limited Warranty. A K&N Blackhawk Induction kit is also available for these trucks. It is part number 71-2584 and covers the 2011 and 2012 6.2L Ford F-150s. It made an estimated 20 horsepower and 17 lb-ft of torque on the chassis dyno.

The K&N 57-2581 cold air intake is designed for 2011-2014 Ford F-150 pickups with the 5.0L Coyot

The K&N 57-2581 cold air intake is designed for 2011-2014 Ford F-150 pickups with the 5.0L Coyote

K&N also offers the 77-2584KP kit for 2011 and 2012 F-150s with the 6.2L engine. The kit includes polished components and adds 18 horsepower and 12 lb-ft of torque. It can be installed in around 90 minutes and comes with a 10-Year/Million Mile Warranty.

K&N designed the 77-2585KS cold air intake kit to fit 2012, 2013, and 2014 Ford F-150 trucks with the 3.7L V6. The kit includes an oiled cotton conical air filter, silver powdercoated tube, and black aluminum heat shield. It adds an estimated 11 horsepower at 5536 RPM and 10 lb-ft of torque at 3333 RPM.

For 2015, 2016, and 2017 Ford F-150 trucks with the 5.0L engine, the K&N 63-2591 Aircharger cold air intake was designed to bolt right into the truck. It can be installed in less than 2 hours and we guarantee it will increase your horsepower. When we put this kit on a truck and dyno tested it, we saw an estimated increase of 12 horsepower and almost 10 lb-ft of torque. For good performance and great looks, the K&N 71-2591 Blackhawk Induction intake kit comes with a black cone filter and black air tube. It is good for an estimated 11 horsepower at 4553 RPM and almost 12 lb-ft of torque at 3731 RPM. It was designed to fit the 2015-2017 Ford F-150 equipped with the 5.0L engine.

K&N designed the 71-2581 Blackhawk Induction intake for the 2011-2014 F-150 with the 5.0L engine

K&N designed the 71-2581 Blackhawk Induction intake for the 2011-2014 F-150 with the 5.0L engine

If black tubes aren’t your style, K&N also offers the 77-2591KP cold air intake for 2015-2017 F-150s with the 5.0L Coyote motor. This kit has a polished aluminum air tube and conical air filter with polished end cap. On a 2015 Ford F-150 with 5.0L engine, the kit made an estimated 13 horsepower and 15 lb-ft of torque.

2015 and 2016 Ford F-150s with the 3.5L Ecoboost motor can benefit from the K&N 63-2592 cold air intake kit. It adds an estimated 23 horsepower and 34 lb-ft of torque at 3505 RPM. This is a simple and fast way to add some more of that stump pulling torque that the Ecoboost is known for.

The polished K&N 77-2581KP intake will spruce up the engine bays of 2011-2014 F-150s with the 5.

The polished K&N 77-2581KP intake will spruce up the engine bays of 2011-2014 F-150s with the 5.0L

2015, 2016, and 2017 2.7L Ecoboost F-150s were not forgotten about, we designed the 63-2593 cold air intake for them. With an estimated increase of 19 horsepower at 4500 RPM and 34 lb-ft of torque at 3006 RPM, this kit will add horsepower and torque and won’t void any factory warranties.

If you picked up a 2015 or 2016 F-150 and it has the non-turbo 3.5L, K&N makes the 63-2596 cold air kit that is guaranteed to add horsepower and torque. This is a quick way to help make up some of that power difference between the naturally aspirated 3.5L and the 3.5L Ecoboost. The kit made an estimated 12 horsepower at 5686 RPM and almost 10 lb-ft of torque at 3511 RPM.

K&N Cabin Air Filters

For owners of the first and second generation of Ecoboost, K&N developed the 57-2583 cold air in

For owners of the first and second generation of Ecoboost, K&N developed the 57-2583 cold air intake

K&N also makes a line of washable and reusable cabin air filters for the 2015 and 2016 Ford F-150. These cabin air filters are made of an advanced synthetic material. They also have an electrostatic charge that grabs and holds onto most mold, mildew, pollen, spores, fungus, and germs. They have a factory fit, come pre-treated, and ready to install right out of the box. For the 2015-2016 F-150, K&N has the VF2049 cabin air filter. It fits all trim levels and engine sizes and comes with a 10-year/100,000 Mile Limited Warranty.

Ford F-150 SVT Raptor

The Ford F-150 Raptor is an off-road beast, but it could always use a little more power

The Ford F-150 Raptor is an off-road beast, but it could always use a little more power

Ever since the Ford Raptor was introduced in 2010, it has been an extremely popular vehicle. It offers off-road capability, great looks, and lots of power. If you own one of these trucks, K&N has not forgot about you. If you own a 2010-2015 Ford Raptor with either the 5.4L or the 6.2L, the K&N 33-2385 is designed to boost horsepower and acceleration. If you are looking for guaranteed power and own a 2010 5.4L Raptor, the K&N 57-2575 cold air intake kit is what you need. If you own the 2010-2014 Raptor with the 6.2L, the K&N 77-2579KTK offers an estimated 20 horsepower and 21 lb-ft of torque.

If you didn’t find you vehicle here, us the K&N vehicle search tool to find exactly what you need. Once you found your part number, use the dealer search tool to find a dealer near you.

K&N designed and engineered the 57-2584 cold air intake to fit 2011-2012 Ford F-150 6.2L trucks

K&N designed and engineered the 57-2584 cold air intake to fit 2011-2012 Ford F-150 6.2L trucks

The K&N 71-2584 intake adds an estimated 20 HP and 17 lb-ft of torque to 2011-2012 6.2L F-150 tr

The K&N 71-2584 intake adds an estimated 20 HP and 17 lb-ft of torque to 2011-2012 6.2L F-150 trucks

Looking for some bling under the hood of your 2011-2012 F-150 6.2L? The 77-2584KP is for you!

Looking for some bling under the hood of your 2011-2012 F-150 6.2L? The 77-2584KP is for you!

2012-2014 3.7L F-150 owners can benefit from the K&N 77-2585KS cold air intake system

2012-2014 3.7L F-150 owners can benefit from the K&N 77-2585KS cold air intake system

If you own a new, aluminum F-150, K&N makes the 63-2591 to help your 5.0L engine breathe easier

If you own a new, aluminum F-150, K&N makes the 63-2591 to help your 5.0L engine breathe easier

The K&N 71-2591 Blackhawk Induction intake kit fits the 2015-2017 5.0L F-150

The K&N 71-2591 Blackhawk Induction intake kit fits the 2015-2017 5.0L F-150

For 2015-2017 Ford F-150 5.0L owners, the K&N 77-2591KP adds an estimated 13 HP

For 2015-2017 Ford F-150 5.0L owners, the K&N 77-2591KP adds an estimated 13 HP

If you own the newest generation of Ecoboost F-150, 2015-2016, the K&N 63-2592 is for you

If you own the newest generation of Ecoboost F-150, 2015-2016, the K&N 63-2592 is for you

For the smaller 2.7L Ecoboost in the 2015-2017 F-150, the K&N 63-2593 makes an estimated 19 HP

For the smaller 2.7L Ecoboost in the 2015-2017 F-150, the K&N 63-2593 makes an estimated 19 HP

If you own the non-turbo 3.5L F-150, K&N makes the 63-2596 intake specifically for your truck

If you own the non-turbo 3.5L F-150, K&N makes the 63-2596 intake specifically for your truck

To keep the cabin air of your 2015-2016 F-150 fresh, you can use the K&N VF2049 cabin air filter

To keep the cabin air of your 2015-2016 F-150 fresh, you can use the K&N VF2049 cabin air filter

The K&N 77-2579KTK cold air intake comes with a new radiator overflow tank to replace the stock unit

The K&N 77-2579KTK cold air intake comes with a new radiator overflow tank to replace the stock unit

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N