Cold Air Intake - High-flow, Aluminum Tube - NISSAN 350Z, V6-3.5L

599,99 USD
Disponibile
SKU
69-7070TP
The K&N 69-7070TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 300Z 3.5 Liter V6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7070TP cold-air intake consists of a roto-molded plastic intake scoop that mounts behind the 350Z's front fascia directing cooler outside air through free-flowing aluminum tubing into the K&N carbon fiber topped air box. Inside the air box is a black rubber topped K&N high-flow air filter connecting to a mandrel-bent, 3" aluminum induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The intake tubes have an attractive silver powder-coat finish that's made to last. The cold-air intake system accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. The tools needed for installation are a screwdriver, pliers, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tubes
  • Washable and reusable lifetime air filter
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • K&N Million Mile Limited Warranty
Estimated Horsepower Gain7.67 HP @ 6208 RPM
Replacement FilterRU-4990
Air Filter ColorRed
Air Filter MaterialCotton Gauze
Air Filter Outlet ShapeRound
Clamps Included3
Clamp MaterialStainless Steel
Clamp StyleRegular
Couplers Included1
System TypeComplete Cold-Air Intake System
Estimated Torque Gain6.5 lbft
Product Style69 Series Typhoon Kits
Intake Pipe Color / FinishPolished
Intake Pipe MaterialAluminum
CARB EO NumberD-269-32
Street Legal In All US StatesYes
TUV Approved (Europe)No
Weight12.3 lb (5.6 kg)
Product Box Height14.5 in (368 mm)
Product Box Length24.1 in (612 mm)
Product Box Width15.5 in (394 mm)
Mounting Hardware IncludedYes
WarrantyNo-Hassle Lifetime Limited
No cross references found for this part
+7.67

cavallo vapore

+6.5

coppia

Recommended Products

Search By Vehicle
*
Search By Dimension
L'articolo che hai aggiunto al carrello NON SI ADATTA al tuo veicolo
Questo articolo si adatta al tuo veicolo

L'articolo qui sotto si adatta al tuo veicolo