Cold Air Intake - High-flow, Aluminum Tube - INFINITI G35 SDN, V6-3.5L

419,99 USD
Disponibile
SKU
69-7081-1TS
The K&N 69-7081-1TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Infiniti G35 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Estimated Horsepower Gain5.13 HP @ 5688 RPM
Replacement FilterRU-4960
Air Filter ColorRed
Air Filter MaterialCotton Gauze
Air Filter Outlet ShapeRound
Clamps Included5
Clamp MaterialStainless Steel
Clamp StyleRegular
Couplers Included2
System TypeShort-Ram Intake System
Estimated Torque Gain4.7 lbft
Product Style69 Series Typhoon Kits
Intake Pipe Color / FinishSilver
Intake Pipe MaterialAluminum
CARB EO NumberD-269-37
Street Legal In All US StatesYes
TUV Approved (Europe)No
Weight5 lb (2.3 kg)
Product Box Height8.5 in (216 mm)
Product Box Length18.25 in (464 mm)
Product Box Width14.5 in (368 mm)
Mounting Hardware IncludedYes
WarrantyNo-Hassle Lifetime Limited
No cross references found for this part
+5.13

cavallo vapore

+4.7

coppia

Recommended Products

Search By Vehicle
*
Search By Dimension
L'articolo che hai aggiunto al carrello NON SI ADATTA al tuo veicolo
Questo articolo si adatta al tuo veicolo

L'articolo qui sotto si adatta al tuo veicolo